BAGHETA BRAZARE
Pret: 118 lei
Cantitate:

BAGHETA  PENTRU SUDO-BRAZARE SI BRAZARE AUTOGENA FRO-LR RIV , BROX AS 

Aliaj destinat sudobrazarii tevilor zincate (lipire tare)

Bagheta din alama (60 Cu, 39,6 Zn, 0,3 Si, 0,1 Sn) cu diametrul de 2 sau 3 mm, lungimea de 500 mm, acoperita cu un strat de flux (decapant) utilizata la brazarea - lipirea tare - tevilor zincate

Temperatura de topire: 875 - 895 ° C

Temperatura de lucru: 900 ° C

Standard
CU 303 acc. DIN EN 1044 (L-CuZn40 acc. DIN 8513)
B-Cu60Zn(Si)(Mn) 870/900 acc. ISO 3677
Nominal composition in [wt.-%] Cu 60; Si 0,3; Sn 0,1; Mn 0,15; Zn remainder
Permitted impurities max. [wt.-%] Al 0,01; As 0,01; Bi 0,01; Cd 0,01; Fe 0,25; Pb 0,02;
Sb 0,01;
Total impurities without Fe max. [wt.-%] 0,2
Technical data
Melting range app. 870 - 900 °C (DIN EN 1044)
Working temperature app. 900 °C
Density app. 8,4 g/cm3
Shear strength 150 - 300 MPa (cemented carbide/steel)
Elongation app. 35%
Electrical Conductivity app. 15,0 m/ Ωmm2
Operating temperature of brazed joint max. 300 °C (without loss in strength)
Standard delivery form *
Wire: 1,5 - 2,0 - 3,0 mm Ø
Rods: 1,5 - 2,0 - 3,0 mm Ø, 500 mm length
Preforms: rings, shaped parts, sections,
*Other delivery forms on request
Application
BrazeTec 60/40 is a brazing alloy with good flow characteristics. It can be used for brazing any
steels, copper as well as for nickel and nickel based alloys.
In special cases BrazeTec 60/40 can be used for brazing cemented carbides.
It can be used for brazing with flame or induction brazing procedures.
Typical applications are found e.g. in automotive and in the electric and tool industry.

Fotografii Produse
8
Pret 2400 lei
Informatii Click
PENTRU COMENZI SUNATI LA 0744493138 , PENTRU PROMPTITUDINE LA LIVRARE. NOU:  SUNTEM DISTRIBUITORI APARATE SUDURA ELECTREX PORTUGALIA , INVERTOARE, MIG MAG, PLASMA, SUDURA IN PUNCTE....   SERVICE, REPARATII APARATE DE ...